ZEBRA ZD230D

Printer Setup

  1. Connect the power cable to the printer.

  1. Press the power button and wait for the status LED to turn green.

  1. Pull the yellow buttons on both sides to open the cover.

  1. Load the label roll between the media holders.

  1. Press the FEED button to check if the labels feed correctly.

Connecting the Printer

I. Device Setup

Note: ZEBRA mobile printing is only supported on Android devices.

1

Connect the power cable and LAN cable to the printer.

2

Install Zebra Print from the Google Play Store.

3

Open the app and select the navigation menu (☰) and tap App Settings.

4

Change the unit of measurement to millimeters (mm) and return to the previous screen.

5

Tap the ... button at the bottom and select Add Printer. Choose Wi-Fi & Ethernet Network as the connection method.

6

Tap Open Settings and select your Wi-Fi network. (Skip this step if already connected to Wi-Fi.)

7

Tap Search Printers and select your printer.

8

Enter the label size and tap Print Test Page to verify label output.

II. Printing Labels

Once the Zebra Print app is set up, you can print labels from BoxHero.

1

Create barcode labels on the BoxHero web platform (PC/Desktop), which can then be used on your mobile device.

Learn more about designing barcode labels here.

2

Open the BoxHero app on your mobile device and tap Print Barcode on the home screen.

3

Tap Select Label and choose your design.

4

Select the items to print, enter the print quantity, and tap Done.

5

Tap the Print button and select Print again in the pop-up. (If the printer is not listed, tap “More / More Options.”)

6

Choose your printer and tap the print icon on the next screen to confirm printing.

Last updated